Avengers Come to Edinburgh!

A couple of months ago my day started out like any other day does for a project manager, an email popped in to my in box. An enquiry for some illuminated curved face takeaway menu cases. Nothing strange or out of the ordinary about that, I thought. I specified the product, sent the cost, which was accepted and the job put into production.

Very soon after this I received another request from the same client; they were looking for some built up halo lit letters with brushed and polished stainless steel returns, again nothing unusual about this. I contacted the client for more information, and that is when it all became clear what the project was. “We are doing a little filming in Edinburgh, and need some signage to dress the sets” she said! The penny then dropped and I realised what the “little” filming was. Not every day you get involved with a project that is going to have a global audience. We finalised the specification and finishes for the letters and these were put into production. There was a specific deadline for delivery with these, due to the tight filming schedule. We managed to meet this deadline, in fact we delivered them early – our own super heroes swung in to action!

By this time the client was in Edinburgh and requested a visit to our premises to meet us and have a look at our production set up. They popped in and met our own team of special people, they realised that there were other items we could assist with. They explained that there would be many requests to come and warned us that there would be very tight delivery times – “are you up for it?” she asked, “bring it on” I said! And so it began.

We had produced some café barriers, black posts with printed banners. All supplied within 5 days of getting the artwork. The client called me asking for another set exactly the same, “why?” I asked. “Oh, the original ones are being blown up” she said “but we need them replaced”. No problem, when do you need them, “the day after tomorrow, is that OK”? The banners were printed, hemmed, stitched and delivered all in good time.

In the last week there have been daily requests for printed posters, foamex panels with prints, cut vinyl graphics amongst other things. We even supplied some silver vinyl for wrapping table legs?! Most of these items were made and collected the same day.

Then it was time for our crack installation team to get involved. Cockburn Street was one of the locations. We were asked to do some cover up work on one shop and some branding on another, installing large printed vinyl graphics to windows and fascia’s. Once the shooting was complete we returned to set and undertook the reinstatement work returning the shop to what it looked like originally.

This was an exciting project for us to be involved in and it was particularly satisfying to see our work in all of the National Newspapers and the TV coverage. The fact that for the client, we are a one stop shop covering all aspects of signage took the stress out of their procurement. All of us at Specialized signs have enjoyed our involvement with the project and look forward to the film release. This project worked so well for us and the client, we worked as a team, through project management, design, manufacture, assembly, installation and not to forget admin and accounts. You will agree that this is a pretty special client and quite a high profile project. We have the same value for all of our clients and the same quality of product and service regardless of the project size.

http://www.bbc.co.uk/newsbeat/article/39372925/avengers-land-in-edinburgh-for-infinity-war-film-shoot

 

Huge Vinyl Building Wrap !!

Printed 7 year polymeric vinyl with 7 year polymeric laminate.

IMG_0337

We were approached recently by one of our regular clients. Their premises are the iconic Jenners Depository in Balgreen, or as they are now known, Edinburgh Self Storage. We were told that the distinctive red brick building had cracks appearing in the peirs on the west elevation which were getting progressively worse due to water ingress. Their solution was to have the damaged elements clad with powder coated folded aluminium sheets. We were asked if we could wrap these cladding panels with a printed vinyl complete with matt laminate that would remain colour fast and not shrink or peel. The option we chose was a polymeric 7 year vinyl with a 7 year matt laminate.

Selecting the material wasn’t the only problem we faced, we also had to produce prints to match the existing brickwork and grey concrete sections dividing the levels. We asked one of our designers, who has a keen interest in photography to pop along to site and take some pictures of the brick and the concrete. We used his photographs for the artwork we used to print from. After a couple of test prints we got an almost exact match, both in scale and colour.

The scope of the works allowed for 8 piers each 9.1m high accessed using a Genie Z80 / 60 operated by one of our fully accredited IPAF  carrying operators. We installed the prints working from the bottom to the top overlapping as we went to avoid the risk of any water ingress. It took three days to  complete the installation, as you will see from the photographs we achieved an almost identical match. Our client was exceptionally happy with the outcome and continues to work with us.

This was a pretty unusual project using vinyl, we do all aspects of vinyl work ranging from simple window graphics, full vehicle wraps and printed wall panels.

Oscars Take-Away

Specialized signs recently helped one of our clients create a brand identity for their new addition to a growing port folio of restaurants/ Takeaways.

Once the initial design had been approved and a new brand was born, we fabricated a Gloss black folded dibond sign tray with “Home delivery and phone number” being CNC cut out of the panel, backed with an Opal Acrylic slab. This section was internally illuminated with LED’s. Size of the sign was 600mm x 10,500mm.

“Oscars” we had manufactured this from Polished Stainless Steel, 80mm returns with a 20mm trim Diamond logo, with an Opal Acrylic face and printed vinyl overlay. This section was 500mm x 2000mm in size internally illuminated with LED’s. This part of the sign over hung the folded dibond sign tray to give a free floating effect.

With specialized having a very creative design department and a very skilled production team who fabricate 99% of our signage in house, this enabled us to design, produce and install this sign within 10 working days on top of an already hectic month!!

Sign Makers – Bannatynes Gym Norwich

Another successful installation for our sign makers and project management department. The job consisted of built up letters illuminated by LED’s mounted at high level. The completion of this job was achieved in an impressive timescale with site time reduced to one day by our innovative installation methods. This has helped us to maintain client satisfaction by reducing any disruption to their premises.

We are currently intending to trial new LED modules including the SMD Injection Led 2 Diode Module with Lens Pure White with the intention of raising our already high standards and achieving a more constant illumination in our built up letters and illuminated fret cut signage.

In other news we are carrying out a large branding exercise for Greens across the central belt of Scotland. The installations consist of a variety of fret cut signs with internal illumination, built up letters and cut vinyl. Internally we are providing a mix of cut vinyl and printed vinyl to help maximise the visual impact of the store.

All of the cases above are just a few reasons why we are Scotland’s fastest growing signage company, servicing not only the central belt but the entire United Kingdom.

Introducing our Design & Print Team

DESIGN2At Specialized Signs, we’re not only sign experts but we are also confident and experienced in the creation of digital artwork for quality printinT whether it is digital print, large format or display graphics. We have many years of experience in the advertising field and that’s what makes us experts in creating logos, business cards, posters and corporate material as well.
Our Design team will guide you through the process and will discuss with you the objectives and requirements in order to understand your needs and develop suitable concepts. Every single one of our Designers is excellently trained to operate our large format digital printers and plotters, delivering superb results to give the best service to our clients. Using the latest software, we create print-ready files easily and quickly as well as being able to make any required alterations.

Our print and cut department is equipped with the latest large format digital printers, laminators, vinyl cutters and flatbed applicators for creating all of your signage, wrapping and graphic requirements. We can print onto almost any material and due to our printer being the best in its class, the colours are amazingly rich, deep and bright.

We produce everything in-house, therefore we can assure you that we are always on schedule, producing graphics at high speed and high definition on time for installation or collection.

Vehicle wraps Edinburgh – van wrapping Edinburgh

We are the vehicle wrapping experts in Edinburgh!

FullSizeRender

We recently carried out a full colour change wrap on a Porsche 911 GT3. This was a very high end wrap.  We used coachwork specialists JRM to remove the doors, mirrors, spoiler, front and rear lights, roof sills and other small parts so that we achieved the highest standard possible.  We removed all of these parts so that you could not see the colour of the car even when you opened the doors or boot and even when you go right up to the lights etc you cannot see the paintwork which is under the wrap!  We are Edinburgh’s number one car wrapping specialist!

We also carry out a huge amount of van wraps, either full or partial.  Partial van wraps are a very cost effective solution and can give a fantastic finished product that will raise our brand above your competitors and will not break the bank.

We regularly carryout full vehicle wrap fleet rebands.  A few of our recent clients that we have completed rebrands for are Corstorphine Roofing, Murrayfield Building, Watson & Gordon, Property Care, Ecko Kitchens & Bathrooms, Blacklight, Flexiclean and a lot lot more.  Hopefully you have noticed some of our work driving around Edinburgh.

Vehicle wrapping can be a tricky job but we have 6 fully trained vehicle wrappers who have a vast amount of experience and Specialized Signs has now wrapped thousands of vans, cars, trucks, motorbikes, boats and even planes!

We use the very best vinyl wrapping products along with the correct branded cleaning and primer products and not only that we carry out our vehicle wraps in our state of the art vehicle wrapping bay to guarantee a 100% prefect finished wrap.

We also offer a full 2 year guarantee on all of our vehicle wraps and graphics so that you can rest assured you are getting a quality product that will last at a very reasonable price.

As well as the actual wrapping we can provide a full design service from start to finish so that you know what we apply will be effective and give your brand the image that you require.

For any info on vehicle wrapping and vehicle graphics please email info@specializedsigns.co.uk. Check out photos of some of our amazing wraps on the gallery page of our website.

Illuminated bespoke LED signs throughout Edinburgh, Glasgow and the central belt.

6 Degrees North

IMG_2072

Specialized Signs have recently completed the supply and installation of signs at two sites for 6 Degrees North Specialising in Belgian beers, who showcase beers from their own brewery alongside some of the finest home grown UK & European craft beer.

The project consisted of main fascia signs, folded aluminium sign panels fret cut, with built up letters set inside the panels to create an embossed effect. The edge of the letters are lit with bright white led modules. This gives a subtle and understated illumination. The finish of the panels is a brushed zinc effect complete with matt lamination. One of the challenges we faced was to try and create the zinc effect in print and ensure that the colour was a match to the architect’s specification. There is a brushed texture running through the print, therefore as each fascia comprises 3 or 4 panels it was critical that the vinyl was done as one continuous print. The print was done on polymeric vinyl with a polymeric matt laminate to make sure there is no shrink back at the joins.

Included in the project were built up letters complete with halo illumination. The returns of the letters were painted to a specific RAL colour and the faces finished in the same zinc effect print. A bespoke aluminium A frame pavement sign, the header fret cut and painted black, the bottom of the sign was finished with a branded print and matt laminate.  To complete the internal décor we supplied and installed various internal printed graphics and we were contracted by the company doing the main fit out, to CNC cut a number of MDF panels, these were then painted and installed..Double sided fret cut internally projecting sign with partially illuminated return. Finally to complete the look we produced branded safety manifestations for various glazed door panels in the pub.

Result, a happy client and architect, we are now looking forward to commencing the next addition to their portfolio

Signage Rollout Cumbernauld, Stirling, Falkirk, Bathgate, Livingston, Bo’ness and Grangemouth

DHILLION’S “THE ULTIMATE TASTE”

Our experienced project managers recently helped one of our clients on re-branding 7 restaurants across Scotland. Starting with a blank canvas, working closely with the client and our in house designers, we put together and created a brand identity that looks very unique and eye catching.

As always, going over and above for every client, we suggested LEDs for this project as the LEDs are very energy efficient and have a life span of 50,000 hours, compared to any other illumination.

Each sign manufactured from folded dibond with a subtle Matt Black back ground, with “The ultimate taste” being CNC cut out of the dibond (fret cut) backed with Opal Acrylic. This part of the sign was internally illuminated with our super bright V180 LED modules to maximise illumination. The “Dhillion’s” part of the sign are built up powder coated rim and return letters 400mm cap height with Red Acrylic faces, each letter having Red LED modules within the letters, giving the faces a very Rich Red even glow.

Our very experienced sign fitters had a tight deadline to install all 7 sites within 3 days, before the big launch, which was completed to the highest standard finishing of this project nicely, with the client very satisfied with the outcome and service.

Keep your eyes out for the signs on social media they will be appearing very soon. No job too big or small, please get in touch for any signage requirements, we are here to help advice and guide all of our clients in the right direction on every project.

Breaking news just in……. Specialized signs have been seen on site at Ingliston, Royal highland centre re branding around the grounds, a reliable inside source states that phase 1 is near on completion, keep your eyes out for the headlines on this one!…..Roll on phase 2!!!

Sign makers from Glasgow to Edinburgh and from Newcastle to Aberdeen

Bannatynes Gym Darlington Northern England

Our highly experienced team of sign makers, working in tandem with one of our project managers have collaborated on impressive new illuminated signage installation for this household name. High quality built up letters with a black gloss finish have been backlit with numerous LED’s to deliver a face-lift to the building.

The high level signage was a combination of 500mm and 400mm high built up letters lit up by high quality V180 LED’s. These provide an eye catching effect that offers both a bright and energy efficient solution to the client’s signage needs.

Our sign makers regularly travel throughout Scotland and England to carry out safe and efficient signage installations for a number of prestigious clients. We install an extensive range of signage solutions including cut vinyl, flat cut letters, illuminated fret cut signs, projecting signs and neon signs. And our installation team is always easily identifiable by our distinctive vehicle graphics.

In other news we have been carrying out a large amount of vehicle rebranding for clients in the Edinburgh and Glasgow area with a number of satisfied patrons. We offer both vehicle wrapping and cut vehicle graphics and carry out these installations in our specially designed wrapping bay. Working within the clients budget constraints, we provide a design service to ensure customer satisfaction. Offering samples from a vast amount of vinyl as well as the option of colour matching guarantees the client achieves a perfect colour match to their preexisting company logo. Alternatively we offer a design service that will interpret the client’s requirements and allow their vehicle to be transformed into their vision.

All of the cases above are just a few reasons why we are Scotland’s fastest growing signage company, servicing not only the central belt but the entire United Kingdom.

Sign makers Glasgow – City of Glasgow College

Specialized Signs Glasgow, we are pleased to announce we have won a tender for new signage at the brand new City of Glasgow College building which is due to be completed September 2016.

The amazing signage contract that we have won is for a 75ft folded aluminium sign tray over laid with vinyl graphics and then (the special part) 4ft high double outline purple haze NEON on top.  This huge, very funky neon signs will be powered with special low voltage neon transformers and the sign has a special top hat for easy access and maintenance as the sign is a frightening 40ft above ground level every aspect has been planned out carefully!

We will be posting photos on our social media shortly so keep an eye out as this will be one of the most iconic signs and one that will be hard to miss!

We have been providing the full signage and graphics solutions in Glasgow for years.  Our experienced highly trained project managers carry out full photographic site surveys whist taking your brief and will give you their expert advice to achieve exactly what you require whilst keeping within your planned budge.  Our design team will then provide you with superimposed proofs so that you get exactly what you are looking for and then put professional highly trained installation teams will carry out your installation with our project managers overseeing and scheduling your project.